ONE™ Documentation
1) Introduction
Welcome to Evergreen Solutions. ONE is built for traders who value simplicity and results. It is a strategy designed for all markets that captures short-term momentum in high-volatility conditions. The system is structured to be reactive, focusing on trades with strong volatility expansion and statistically favorable win potential. We don’t sell indicator bundles or gimmicks - you get a single, structured algorithm that integrates with TradingView®, broker APIs, and automation software. In this guide, you’ll find: how ONE works, detailed settings, best practices, and disclaimers. Use it as your definitive reference.
2) Setup & Access Requirements
To use ONE™, you’ll need a free TradingView account. Once logged in, navigate to: Indicators → Invite-Only Scripts → ONE. If you plan to execute trades directly on TradingView, a market data subscription is required to access live market data. The default timeframe for ONE™ is 15 minutes, although you may adjust this to any interval that suits your trading style.
3) Configuration & Settings
Default Timeframe
15 Minute Timeframe
Legal Notice
Risk Disclosure, No-Advice Notice, and Release of Liability
Signal Settings
Long (Default: #4caf50)
Short (Default: #ff5252)
Test (Default: #ffffff)
Allow Longs (Default: Enabled | Disabling ‘Allow Longs’ will remove all long trades from the chart, backtester, and future calculations.)
Allow Shorts (Default: Enabled | Disabling ‘Allow Shorts’ will remove all short trades from the chart, backtester, and future calculations.)
Risk Management
Risk Multiplier (Default: 1 | Modifying ‘Risk Multiplier’ moves the SL proportionally depending on the modifying value. Changing this value from 1 is not recommended.)
Reward Multiplier (Default: 1 | Modifying ‘Reward Multiplier’ moves the TP proportionally depending on the modifying value. Changing this value from 1 is not recommended.)
Continuation Filter (Default: Enabled | Disabling ‘Continuation Filter’ will allow trades to be taken that would otherwise be outside of the safe trend factor. Disabling this setting is not recommended.)
News / Volatility Filter (Default: Enabled | Disabling ‘News / Volatility Filter’ will allow trades to be taken that would otherwise be outside of the safe volatility range. Disabling this setting is not recommended.)
Exit Mode (Default: ONE | Changing ‘Exit Mode” should be done with extreme caution. While the default mode is recommended, users retain full control regarding which mode is used. | ONE = Classic single TP/SL. | BREAKEVEN = SL moves to entry when price equals or exceeds the midpoint visual line. | MULTI = 50% of the position is closed at the midpoint visual line and 50% of the position is closed at the TP.)
Order Size (Default: 1 | Changing this value will increase or decrease the amount of contracts submitted when using signals or automations. This value will always reflect the amount in the ‘Order Size’ input , except when ‘MULTI’ mode is enabled. It is recommended that ‘MULTI’ mode is used with a base of two contracts for maximum efficiency; therefore, without ‘Override MULTI Mode Scaling’ enabled, a base of 2 contracts will be applied. The active position size will always be located in the ‘Mode Display Table’ along with the mode selected, despite what the ‘Order Size’ input displays.)
Override MULTI Mode Scaling (Default: Disabled | Enabling ‘Override MULTI Mode Scaling’ will override the base position size of two recommended for ‘MULTI’ mode. This allows the use of 1 contract, which means that the TP is moved to the midpoint visual line.)
Backtesting
Backtest Filter (Default: Disabled | Enabling ‘Backtest Filter’ allows backtesting independent of TradingView’s ‘Strategy Tester.’)
Backtest Start Date (Starting date of independent backtesting results toggled with ‘Backtest Filter.’)
Backtest End Date (Ending date of independent backtesting results toggled with ‘Backtest Filter.’)
Allowed Hours
Allowed Trading Hours Filter (Default: Enabled | Disabling ‘Allowed Trading Hours Filter’ allows trades to execute at any time during the trading session.)
Allowed Trading Hours (CST) (Default: 17:00 - 15:00 | These values dictate the times trades are allowed to be executed.)
Timeout Settings
Session Timeout Exit (Default: Enabled | Disabling ‘Session Timeout Exit’ prevents the strategy from auto-flattening open positions at 3:45 PM CST (one bar from futures session close). Disabling this feature is not recommended.)
Trade Timeout (Default: Disabled | Enabling ‘Trade Timeout’ will result in the trade closing before the TP or the SL is hit. This is a precautionary function that takes into account market uncertainty.)
-Bars Until Timeout (Default: 8 | If enabled through ‘Trade Timeout,’ ‘Bars until Timeout’ dictates the duration of the trade. Changing the value of ‘Bars Until Timeout’ is not recommended.)
Visual Aids
Display Mode (Default: Dark | This feature is for custom preference and user experience. Select ‘Dark’ when the chart has a dark background. Select ‘Light” when the chart has a light background.)
Automatic Lines (Default: Enabled | Disabling ‘Automatic Lines’ will allow manual control over all visual line toggles. This feature automatically selects which visual lines are enabled depending on the ‘Exit Mode’ selected.)
Entry Line (Default: Disabled | Enabling ‘Entry Line’ will add a visual line to the price at entry.)
Midpoint Lines (Default: Disabled | Enabling ‘Midpoint Lines’ will add a visual line to the median price between the Entry and the TP and between the Entry and the SL.)
Take-Profit Line (Default: Enabled | Disabling ‘Take-Profit Line’ will remove the visual line delineating the TP value.)
Stop-Loss Line (Default: Enabled | Disabling ‘Stop-Loss Line’ will remove the visual line delineating the SL value.)
Mode Display Table (Default: Enabled | Disabling ‘Mode Display Table’ will remove the table from the chart. This table shows the selected ‘Exit Mode’ and the active position size.)
Mode Display Table Position (Default: top_center | This feature determines the chart position of the ‘Mode Display Table,’ and is for custom preference and user experience on the TradingView mobile app.)
Session Key (Default: Disabled | Enabling ‘Session Key’ will add the chart organizing different session times to the chart.)
Session Key Position (Default: bottom_right | This feature determines the chart position of the ‘Mode Display Table,’ and is for custom preference and user experience on the TradingView mobile app.)
Volatility Index Display Table (Default: Enabled | Disabling ‘Volatility Index Display Table’ will remove the chart displaying the current candle volatility from the chart.)
Volatility Index Display Table Position (Default: top_right | This feature determines the chart position of the ‘Mode Display Table,’ and is for custom preference and user experience on the TradingView mobile app.)
P&L Display Table Auto-Remove Override (Default: Disabled | Enabling ‘P&L Display Table Auto-Remove Override’ will display the ‘P&L Display Table’ indefinitely.)
P&L Display Table Position (Default: bottom_center | This feature determines the chart position of the ‘Mode Display Table,’ and is for custom preference and user experience on the TradingView mobile app.)
Technical Aids
EMA (Default: Disabled | Enabling ‘EMA’ will add the custom length visual plot to the chart. This plot can be used to determine if the market is trending up or down.)
ONE MA (Default: Disabled | Enabling ‘ONE MA’ will add the custom calculated plot to the chart. This plot can be used to determine if the market is trending up or down.)
Absorption Zones (Default: Enabled | Disabling ‘Absorption Zones’ will remove the custom calculated plots from the chart. These plots give indications of extreme areas of absorption and exhaustion, signaling strong momentum is about to enter the market.)
Session Backgrounds (Default: Disabled | Enabling ‘Session Backgrounds’ will add the background colors delineating global equity hours.)
Volume Candles (Default: Enabled | Disabling ‘Volume Candles’ will remove the custom calculated overlays from the candles on the chart. These candles display the current strength of buying and selling pressure. The darker the color, the stronger the market strength.)
Watermark (Default: Enabled | Disabling ‘Watermark’ will remove the branding watermark in the bottom left of the chart. If you enjoy our software leave it on for screenshots!)
4) Legal Notices
5) Conclusion
ONE is a tool, not a guarantee. Evergreen Solutions encourages proper risk management at all times. Never risk more than you are willing to lose. If assistance is required, contact: support@evergreensolutions.one .